Large OD Spiral Pipes
HDM’s vision is based on specialisation in Total Foundation Pipe Solutions by providing project support to the industry.
HDM Tubes has started the UK’s first Spirally Welded Pipe mill for the foundation industry.
HDM’s Cardiff Mill is located in the ABP Docks and has direct access to port facilities which enables the handling and loading of long piles.
HDM Tubes can produce up to 3m OD, 32mm wall thickness with special coatings and special design attachments such as clutch/interlock, pile shoes, and rings etc. as well as pipe end bevelling.
HDM has a proven international track record over 4 continents: Europe, Africa, North and South America.
We can supply our spirally welded piling products up to 3m OD and 32mm wall and single pile lengths to suit your needs.
Outside diameter | 20” and 120” |
Wall thicknesses | 6 mm to 32mm |
Pipe length | up to 42 meters and pile weight up to 60 mtons |
Steel grade | up to X70 PSL2 |
External coating | Epoxy (EP) |
Production capacity | 50,000 tons of Foundation Pipe per year |
- Surface Preparation: For the purpose of achieving effective performance in internal or external surfaces where the corrosion protection systems will be applied, satisfactory surface roughness and cleanliness (SA2,5 / SA3) is obtained by using appropriate abrasives for the system.
- Epoxy Coating: Outside Epoxy coating systems are preferred for piles splash zone’s for marine foundation works in order to protect steel surface from corrosion. Epoxy Coatings are applied as per AWWA C-210, NFA 49709, TS EN 10289